The main material of the stainless steel mixing tank is made of stainless steel. It is different from ordinary plastic tanks. For example, it can withstand higher pressures. In some high-pressure occasions, why we often see it is the truth. The most important thing is that it has a feature that its sealing performance is good, preventing the invasion of harmful substances in the air and mosquitoes, so that the liquid stored in the tank is not polluted by the outside world.
In addition to the heat transfer oil heater of the stainless steel mixing tank, there is also a forced flow mold temperature machine. For safety reasons, the design working temperature is above 150 degree , and heat transfer oil is used. In order not to overheat the oil in the heater of the mold temperature machine, the machine uses a forced-flow pumping system, and the heater is composed of a corresponding number of tubes stacked, with finned heating elements in the tubes for diversion, Check the pipes and valves related to the mixing tank, and only start feeding when the conditions for receiving materials are guaranteed.
Check whether the stirring motor, reducer, mechanical seal, etc. are normal, whether the oil level of the reducer is appropriate, and whether the cooling water supply of the mechanical seal is normal. In the case of no abnormality, start the stirring and put in the material according to the specified amount. It is strictly forbidden for the stirring kettle with the bottom bearing of the stainless steel stirring tank above 10m³ to run empty, to ensure that the stirring can be started when the bottom bearing is immersed under the liquid surface.
